-500x137.png "evolutronics")
Model: EVO-0006
Description :Multifunction USB converter board fully supports Win8, Win7, WinXp, Win2K,WinCE, Linux, Mac systems, 32-bit, 64-bit .The history of the most powerful USB serial debugging tools, set USB to serial (TTL), to 232, turn 485, TTL, 232,485 conversion six practical function in a professional d..
1,200.00د.ج
Ex Tax:1,200.00د.ج
-4 %
Model: EVO-0706
Description:For microcontrollers without an analogue-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even..
1,350.00د.ج 1,400.00د.ج
Ex Tax:1,350.00د.ج
Model: EVO-1240
TJA1050 CAN Controller Bus Driver Interface Module is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. The TJA1050 is the third ..
500.00د.ج
Ex Tax:500.00د.ج
Model: EVO-0004
Description:This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. Connect the module to any USB port of t..
900.00د.ج
Ex Tax:900.00د.ج
Model: EVO-0003
Description:This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port. ThisCP2102 doesn't require any ext..
950.00د.ج
Ex Tax:950.00د.ج
-250x250.jpg "FT232RL FTDI USB TTL SERIAL MODULE ADAPTER")
Model: EVO-1252
Description:The main chip for the FT232, generates a virtual serial port after installing the driver 2, USB to take power, leads to the interface includes a 3.3V (<40mA), 5V, GND, TX, RX, the signal pin level is 3.3V, positive logic 3, onboard status indicator, receive indicator, the correct inst..
800.00د.ج
Ex Tax:800.00د.ج
Model: EVO-0002
Description:The main chip for the FT232, generates a virtual serial port after installing the driver 2, USB to take power, leads to the interface includes a 3.3V (<40mA), 5V, GND, TX, RX, the signal pin level is 3.3V, positive logic 3, onboard status indicator, receive indicator, the correct inst..
800.00د.ج
Ex Tax:800.00د.ج
Model: EVO-0007
Description:The MAX485 TTL To RS485 Module converts TTL signal to RS485 for long-range, high data rate error-prone differential communication. Digital communications networks implementing the EIA-485 standard can be used effectively over long distances and in electrically noisy environments. Multipl..
550.00د.ج
Ex Tax:550.00د.ج
Model: EVO-0806
This Level Converter- 4 Channel features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels.The logic level converter circuit convert signals as low as 1.8 V to as high as 5 V and vice versa, and its four channels a..
250.00د.ج
Ex Tax:250.00د.ج
Model: EVO-0574
Description:You’ve always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The CJMCU-MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the..
950.00د.ج
Ex Tax:950.00د.ج
-250x250.jpg "MODULE USB VERS TTL PL2303H")
Model: EVO-0005
Description:A handy USB to TTL converter based on the PL2303HX.3 LEDs are on-board to indicate power, data reception, and data transmission. A 5V and 3.3V output are available--you can power your project directly from the USB port, so it functions as a USB power supply, too. The 5-pin I/O is clearly..
550.00د.ج
Ex Tax:550.00د.ج
-250x250h.jpeg "SCM TTL TO RS485 MODULE 485 TO SERIAL UART")
New
HOT
Model: EVO-1054
..
600.00د.ج
Ex Tax:600.00د.ج