![ATTINY85 MINI USB DEVELOPMENT BOARD ATTINY85 MINI USB DEVELOPMENT BOARD](http://evolutronics-dz.com/image/cache/catalog/2222/1PCS-Blue-Black-TINY85-Digispark-Kickstarter-Micro-Development-Board-ATTINY85-module-for-Arduino-IIC-I2C-USB-550x550.jpg)
- Stock: In Stock
- Model: EVO-0115
- Weight: 8.00g
- Dimensions: 18.00mm x 23.00mm x 1.10mm
Description:
The ATTiny85 based mini development board is similar to the Aduino, but cheaper and smaller (of course a bit less powerful). Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
With a whole host of shields to extend its functionality and the ability to use the familiar Aduino IDE, this board is a great way to jump into microcontroller electronics. Power via USB or External Source - 5v or 7-16v (automatic selection). On-board 150ma 5V Regulator. Built-in USB (and serial debugging). 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB) 8k Flash Memory (about 6k after boot loader) I2C and SPI (via USI) PWM on 3 pins (more possible with Software PWM) ADC on 4 pins Power LED and Test/Status LED
Features :
High Performance, Low Power AVR® 8-Bit Microcontroller
Non-volatile Program and Data Memories
8K Bytes of In-System Programmable Program Memory Flash
Endurance: 10,000 Write/Erase Cycles
512 Bytes In-System Programmable EEPROM
512 Bytes Internal SRAM
Peripheral Features
Two High-Frequency PWM Outputs with Separate Output Compare Registers
USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
10-bit ADC
4 Single-Ended Channels
Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
Speed Grade : 0 – 10 MHz @ 2.7 – 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
Industrial Temperature Range
Low Power Consumption
Active Mode:1 MHz, 1.8V: 300 µA
Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.
Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.