Menu
Your Cart
FREE FAST SHIPPING ON ORDERS ABOVE 30000.00DA

DJI NAZA-M LITE V1.1 WITH GPS KIT

DJI NAZA-M LITE V1.1 WITH GPS KIT
-6 %
DJI NAZA-M LITE V1.1 WITH GPS KIT
This product qualifies for free shipping
This block is set to appear automatically on products above a certain price, which may qualify for free shipping or other perks.
  • Stock: In Stock
  • Model: EVO-0328
  • Weight: 66.30g
191 samples sold
Product Views: 925
31,500.00د.ج
33,500.00د.ج
Ex Tax: 31,500.00د.ج

Description:

The DJI NAZA-M Lite V1.1 with GPS Kit is a simplified version, inheriting the high reliability and stability of the Naza M flight controller’s heritage. The Naza M Lite controller has an all-in-one design which means the installation is easy and straightforward while saving space and weight. In this small flight controller, you will find inner damping, a 3-axis gyroscope, a 3-axis accelerometer and a barometer. The Naza M Lite measures flying altitude and attitude which is used for autopilot / automatic control for altitude hold, the GPS provides a position hold capability enjoyed on the Naza M V2 and DJI Wookong M flight controllers. The Naza M Lite GPS is the most cost-effective solution to offer so much from the DJI Innovations line of flight controllers.

The Naza M Lite v1.1 GPS system offers three flight modes, GPS Atti. Mode, Atti. Mode and Manual Mode. The pilot can switch between these modes to achieve different flight characteristics. A new feature for the Naza M Lite GPS is the automatic adjustment while in the flight of the flight modes; the Naza M Lite v1.1 GPS will gently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure without user intervention.

Intelligent Orientation Control (IOC) means that no matter where the nose is pointing in the forward direction is still the forward direction, and has nothing to do with nose direction, there is no need to be concerned with the loss of orientation when using the IOC mode, the front will always be front, even when it’s back.

If you have a transmitter which supports failsafe features compatible with the Naza M Lite, like the Futaba 8J, you can set the failsafe through port U on the flight controller. The Naza controller has built in an auto level failsafe function, if the communication between Naza and the transmitter is lost, the outputs of all command sticks from the RC controller will default to the centre position, and the GPS module allows you also set RTH (Return To Home) in the event of the failsafe being used. If your transmitter has only 4 channels, then MC will work in Atti—mode by default without the failsafe function.

The Naza M Lite GPS also has outputs for use with a servo-operated gimbal. Adding a gimbal to the system is easy and straightforward with an easy-to-follow set-up and calibration procedure. Please note the Lite will not work with the DJI Zenmuse H3 3D Brushless Gimbal.

Specification:

Weight

MC: 25gm;

VU: 20gm;

GPS: 21.3gm

Dimensions

MC: 45.5mm x 31.5mm x 18.5mm; 

VU: 32.2mm x 21.1mm x 7.7mm;

GPS & Compass: 46mm(diameter)x9mm

Operating Voltage

MC: 4.8V~5.5V;

VU: 7.2V ~ 26.0 V

(recommend 2S ~ 6S LiPo)

Power Consumption

MAX1. 5W (0.3A@5V)

Normal:0.6W (0.12A@5V)

Operating Temperature

-10°C ~ 50°C

Features:

All-in-One Design

Advanced attitude stabilizes Algorithm

Multiple flight control mode/intelligent switching

GPS Module Available/Accurate Position Hold

Intelligent Orientation Control (IOC)

Failsafe mode

Low voltage protection

Motor Arm and Motor Dis-arm

Support Futaba S-Bus and PPM receiver

Supported multi-rotor types

Built-in Gimbal stabilization function

Remote adjustment

Basic Performance:

Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6

Supported ESC Output: 400Hz refresh frequency

Recommended Transmitter: PCM or 2.4GHz with a minimum of 4 channels

Working Voltage Range:MC:4.8V~5.5V; VU: 7.2V ~ 26.0 V (recommend 2S ~ 6S LiPo)

Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V)

Operating Temperature: -10°C ~ 50°C

Assistant Software System Requirement: Windows XP sp3 / Windows 7 / Windows 8

Flight Performance:

Hovering Accuracy(GPS Mode): Vertical:±0.8m; Horizontal:±2.5m:

Max Yaw Angular Velocity of 200°/s

Max Tilt Angle: 45°

Ascent / Descent: ±6m/s

Hardware:

Built-In Functions: Three Modes Autopilot; Enhanced Fail-safe; Low Voltage Protection; S-Bus Receiver Support 2-axle Gimbal Support.

Package Included:

1 x DJI Naza Controller Unit

1 x DJI Remote LED module for Coding and Interfacing with PC

1 x DJI Power Module

1 x DJI USB to MicroUSB Cable (18 inches)

1 x GPS Module

1 x GPS Module Stand

8 x Servo Cables (5 Inches Each)

1 x Set of Precise Double sided tape

Write a review

Note: HTML is not translated!
Bad Good

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities. 

Tags: DJI , NAZA-M , LITE , V1.1 , WITH , GPS , KIT