Menu
Your Cart
FREE FAST SHIPPING ON ORDERS ABOVE 30000.00DA

HC-12 433 SI4463 WIRELESS SERIAL MODULE

HC-12 433 SI4463 WIRELESS SERIAL MODULE
HC-12 433 SI4463 WIRELESS SERIAL MODULE
HC-12 433 SI4463 WIRELESS SERIAL MODULE
HC-12 433 SI4463 WIRELESS SERIAL MODULE
HC-12 433 SI4463 WIRELESS SERIAL MODULE
HC-12 433 SI4463 WIRELESS SERIAL MODULE
HC-12 433 SI4463 WIRELESS SERIAL MODULE
  • Stock: In Stock
  • Model: EVO-0116
  • Weight: 2.00g
  • Dimensions: 27.50mm x 13.50mm x 4.00mm
190 samples sold
Product Views: 1084
1,800.00د.ج
Ex Tax: 1,800.00د.ج

HC-12 wireless RF UART communication module is a new generation of multi-channel embedded wireless data transmission module. The Radio frequency of 433.4 – 473.0MHz, can be setting a communication channel, step is 400kHz, a total of 100 channels. The module maximum transmit power is 100mW (20dBm), and -116dBm receiver sensitivity air of the 5000bps baud rate, communication distance about 500 meters.

The module adopts a stamped hole encapsulation method, which can be welded. The module size is 27.4mm*13.2mm *4mm (including antenna seat, not including the spring antenna), which is convenient for the customer to be embedded in the application system. The module has a PCB antenna seat ANT1, users can use the coaxial cable, the use of 433MHz band external antenna.

The module also has antenna welding hole ANT2, convenient user welded spring antenna. The user can choose one kind of antenna according to the request. The module contains MCU, users do not need to program in addition, just send and receive

UART data. The module uses a variety of UART transmission mode, the user can choose

according to the requirements of the use of AT command. The four UART modes of FU1, FU2, FU3, FU4, the average operating current is 3.6mA, 80μA, 16mA and 16mA, the maximum operating current is 100mA (full power transmit state)  HC12 Module is based on the SI4463 EZRadioPro family chip by SiLabs. This module offers a wireless data transmission and reception range of approximately 1 km in the open air. It’s a low power radio chip that is ultra-easy to use.

This module has an onboard STM8S003F3P6 MCU which is communicating with the SI4463 so that the user can communicate with the HC12 module using a simple TTL 2 wire serial interface (RX, TX, GND). 

If you need to learn about the in-depth working of this module check this tutorial.

Features 

IEEE 802.15.4g compliant

Frequency range = 119–1050 MHz

Receive sensitivity = –126 dBm

Serial TTL (RX, TX, GND) interface

Modulation (G)FSK, 4(G)FSK, (G)MSK, OOK

Max output power +20 dBm

Low active power consumption 10/13 mA RX, 18 mA TX at +10 dBm

Ultra low current powerdown modes 30 nA shutdown, 50 nA standby

Data rate = 100 bps to 1 Mbps

Fast wake and hop times

Highly configurable packet handler

TX and RX 64 byte FIFOs

Auto frequency control (AFC)

Automatic gain control (AGC)

Low BOM

Low battery detector

FCC Part 90 Mask D, FCC part 15.247, 15,231, 15,249, ARIB T-108, T-96, T-67, RCR STD-30, China regulatory

ETSI Class-I Operation with SAW

Write a review

Note: HTML is not translated!
Bad Good

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities. 

Tags: HC-12 , 433 , SI4463 , WIRELESS , SERIAL , MODULE