Menu
Your Cart
FREE FAST SHIPPING ON ORDERS ABOVE 30000.00DA

KIT MODULE RFID PN532 NFC – 13.56

KIT MODULE RFID PN532 NFC – 13.56
KIT MODULE RFID PN532 NFC – 13.56
KIT MODULE RFID PN532 NFC – 13.56
-28 %
KIT MODULE RFID PN532 NFC – 13.56
KIT MODULE RFID PN532 NFC – 13.56
KIT MODULE RFID PN532 NFC – 13.56
KIT MODULE RFID PN532 NFC – 13.56
  • Stock: In Stock
  • Model: EVO-0041
  • Weight: 80.00g
  • Dimensions: 42.70mm x 40.40mm x 4.00mm
190 samples sold
Product Views: 1344
1,800.00د.ج
2,500.00د.ج
Ex Tax: 1,800.00د.ج

DESCRIPTION

PN532 NFC RFID module V3 is built around NXP PN532 and NFC is a popular technology in recent years. Near find communication(NFC)is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity, usually no more than a few centimeters.

This is also known as the short-range wireless communication, high frequency wireless communication technology allowing for non-contact-point data transfer between the electronic device to exchange data . This technology consists of a contact-free radio frequency identification (RFID) first developed by Sony and Philips mainly for mobile phones and other handheld devices to provide M2M (Machine to Machine) communication. Near-field communication has a natural safety.

Almost all the IO pins of NXP532 has been breakout on this module. Users could easily connect and play. On this module, I2C is the data Interface by default. With our Arduino Sensor Shield, it is very easy to plug and play. However, if users want to use other interface such as UART or SPI, this module also makes it easy to break out those pins.

Specification:

Small dimension and easy to embed into your project

Support I2C, SPI and HSU (High Speed UART), easy to change between those modes

Support RFID reading and writing, P2P communication with peers, NFC with Android phone

RFID reader/writer supports:

Mifare 1k, 4k, Ultralight, and DesFire cards

ISO/IEC 14443-4 cards such as CD97BX, CD light, Desfire, P5CN072 (SMX)

Innovision Jewel cards such as IRT5001 card

FeliCa cards such as RCS_860 and RCS_854

Up to 5cm~7cm reading distance

On-board level shifter, standard 5V TTL for I2C and UART, 3.3V TTL SPI

Arduino compatible, plug in and play with our shield

Exchange data with other NFC devices such as smartphone

Plug and play, Arduino compatible

Built in PCB Antenna, with 4cm~6cm communication distance

Specifications:

Operating Voltage

3.3V ~ 5V

Supporting Protocols

II2, SPI and HSU (High-Speed UART)

I2C / UART: 3.3V ~ 24V TTL

SPI: 3.3V TTL with 100-ohm resistors in series

Communication distance

5cm~7cm

Module Size

42.7 x 40.4 x 4 mm (LxWxH)

Application:

Read/write RFID card

As basic function, this module could read and write RFID card. Various cards could be supported.We also supply libraries for Arduino.

P2P communication

Two PN532 modules could communicate with each other wirelessly

NFC with Andriod Phone

Write a review

Note: HTML is not translated!
Bad Good

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities. 

Tags: KIT , MODULE , RFID , PN532 , NFC , 13.56