- Stock: In Stock
- Model: EVO-0192
- Weight: 41.00g
- Dimensions: 48.00mm x 57.00mm x 27.00mm
Description:
This controller uses novel bi-directional high-power SCR. It can be very convenient adjust the current up to 25A, and solve the over current problem of the heating wire resistance is too small in the case of cooling causing good. The output voltage is adjusted anywhere between 50V-220V for use with electrical appliances. It can use to such as electric stove, water heater tune thermal, lighting dimmer, small motor speed, electric iron thermostat, and achieve dimming, thermostats, pressure regulator effect.
Specifications:
Input Supply Voltage: 110V ~ 220V AC
Output Voltage: 50V-220V(Output voltage < = Input supply voltage)
Maximum Output Power: 2000W
Maximum Output Current: 25A
Operation Temperature:-20℃~40℃
Features:
This controller uses high-quality SCR. And the max current is up to 25A
For the safety, we suggest the continuous load current is within 5A
This AC voltage regulator can be used to control AC motor speed, AC light and heating wire temperature
Inductive or Capacitive Load power should be reduced
For example, recommended for motors within 1000W
Operating Instruction:
Before you attempting to wire the controller, make sure all power is disconnected.
Cut any one of the battle line or zero line of the lamp or electrical appliances, and connect wires refer to the “wiring diagram” (NO.6 picture)
Turn on the power, and adjust the potentiometer.
If the adjustment range is found to be small, please adjust the blue potentiometer on the product counterclockwise to set the maximum adjustment range to 50V to input voltage.
Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.
Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.