-500x137.png "evolutronics")
-550x550.jpg "GY-91 MPU9250 BMP280 10DOF ACCELERATION GYROSCOPE COMPASS AND PRESSURE")
-80x80.jpg "GY-91 MPU9250 BMP280 10DOF ACCELERATION GYROSCOPE COMPASS AND PRESSURE")
GY-91 MPU9250 BMP280 10DOF ACCELERATION GYROSCOPE COMPASS AND PRESSURE
- Stock: In Stock
- Model: EVO-0107
- Weight: 5.00g
- Dimensions: 21.00mm x 15.00mm x 2.00mm
190 samples sold
Product Views: 2352
2,200.00د.ج
Ex Tax: 2,200.00د.ج
Model: EVO-0104
DESCRIPTIONADXL345 Triple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up t..
800.00د.ج
Ex Tax:800.00د.ج
-250x250.jpg "BMP180 DIGITAL BAROMETRIC PRESSURE SENSOR")
-23 %
Model: EVO-0109
Description:The BMP180 is the function compatible successor of the BMP08 5, a new generation of high precision digital pressure sensors for consumer a..
580.00د.ج 750.00د.ج
Ex Tax:580.00د.ج
Model: EVO-0110
Description:BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pre..
850.00د.ج
Ex Tax:850.00د.ج
-250x250.jpeg "TRIPLE AXIS ACCELEROMETER AND GYRO BREAKOUT - MPU6050 GY-521")
-13 %
Model: EVO-0136
DESCRIPTIONGY-521 MPU6050 Module – Triple Axis Accelerometer And Gyro Module uses the popular MPU6050 Sensor which includes both a 3 axis acceleromete..
680.00د.ج 780.00د.ج
Ex Tax:680.00د.ج
-20 %
Model: EVO-0573
Description:The GY 87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor has 3 in one MPU60..
800.00د.ج 1,000.00د.ج
Ex Tax:800.00د.ج
Model: EVO-0449
Description :These are post insertion Tee Nuts that can be added anywhere along the slot of V-Slot or compatible extrusions.They are ni..
30.00د.ج
Ex Tax:30.00د.ج
Model: EVO-0448
Description :These are post insertion Tee Nuts that can be added anywhere along the slot of V-Slot or compatible extrusions.They are ni..
30.00د.ج
Ex Tax:30.00د.ج
Model: EVO-0446
V-SLOT Delrin WheelThe precision shim is placed in-between the two bearings. To assemble, first push one bearing into the wheel. Then using a screw as..
450.00د.ج
Ex Tax:450.00د.ج
Model: EVO-0219
Description:Colourful male-to-female connector jumper wire, breadboard jumper wire. male-to-female connector jumper wire cable for breadboar..
15.00د.ج
Ex Tax:15.00د.ج
Model: EVO-0683
Now these are low-profile! These 'hidden' corner brackets fit neatly inside the groove in our V-Slot extrusion, sitting neatly out of the way - making..
70.00د.ج
Ex Tax:70.00د.ج
Model: EVO-0682
DESCRIPTIONThese Cast Corner Brackets are used to connect two V-Slot Linear Rails together for a 90 degree connection."Mount this corner to V-Slot Lin..
115.00د.ج
Ex Tax:115.00د.ج
Model: EVO-1073
Description:Colourful male-to-female connector jumper wire, breadboard jumper wire. male-to-female connector jumper wire cable for breadboard. A ..
12.00د.ج
Ex Tax:12.00د.ج
Model: EVO-1072
Description:Colourful male-to-male connector jumper wire, breadboard jumper wire. male-to-male connector jumper wire cable for breadboa..
12.00د.ج
Ex Tax:12.00د.ج
Model: EVO-0220
Description:Colourful male-to-male connector jumper wire, breadboard jumper wire. male-to-male connector jumper wire cable for breadboa..
15.00د.ج
Ex Tax:15.00د.ج
-250x250.jpg "20CM FEMALE TO FEMALE BREADBOARD JUMPER CABLE 2.54MM")
-250x250.jpg "20CM FEMALE TO FEMALE BREADBOARD JUMPER CABLE 2.54MM")
Model: EVO-0221
Description:Colourful female-to-female connector jumper wire, breadboard jumper wire. female-to-female connector jumper wire cable for bread..
15.00د.ج
Ex Tax:15.00د.ج
Model: EVO-0239
Description :SC10UU 10mm linear aluminum ball bearing sliding bearing cap for CNCFeatures:Universal ball bearings are great for replacing damaged ball..
780.00د.ج
Ex Tax:780.00د.ج
Model: EVO-0479
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
1,600.00د.ج
Ex Tax:1,600.00د.ج
Model: EVO-0482
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
2,200.00د.ج
Ex Tax:2,200.00د.ج
-250x250.jpg "ESP32 WROOM-32 MCU MODULE")
-9 %
Out Of Stock
Model: EVO-0123
This is ESP WROOM 32 MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from ..
2,000.00د.ج 2,200.00د.ج
Ex Tax:2,000.00د.ج
-12 %
Model: EVO-0457
Highest quality precision GT2 Width 6mm Black Open ended with steel wire Timing Belt For 3D Printer. Made from NEOPRENE Synthetic Rubber reinfor..
500.00د.ج 570.00د.ج
Ex Tax:500.00د.ج
Model: EVO-0450
Description :These are post insertion Tee Nuts that can be added anywhere along the slot of V-Slot or compatible extrusions.They are ni..
25.00د.ج
Ex Tax:25.00د.ج
Model: EVO-0359
It is a 2.54mm 1×40 Pin Female Single Row Through-hole Header Strip. It has a single row of 40 pins. Ideal for through-hole mounting...
80.00د.ج
Ex Tax:80.00د.ج
-250x250.jpg "TERMINAL BLOCK SCREW PITCH 5.08MM 2 PIN")
Model: EVO-0643
Description :KF301 2 Pin 5.08 mm Pitch Plug-in Screw Terminal Block Connector is a type of electrical connector, frequently used to connect wires to t..
35.00د.ج
Ex Tax:35.00د.ج
Model: EVO-0366
8 Pin IC Socket base adaptor is an 8 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required...
15.00د.ج
Ex Tax:15.00د.ج
Model: EVO-0379
28 Pin IC Socket base adaptor is an 28 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
35.00د.ج
Ex Tax:35.00د.ج
-250x250.jpg "Linear Rail Shaft Guide/Support - 10mm Diameter - SK10")
-250x250.jpg "Linear Rail Shaft Guide/Support - 10mm Diameter - SK10")
Model: EVO-0250
SK10 10MM linear bearing rail support XYZ Shaft Table CNC Router SH8A design End Support is used mainly to support Hard Chrome Plated Rods in CNC Rout..
450.00د.ج
Ex Tax:450.00د.ج
Model: EVO-0162
DESCRIPTION30A BLDC ESC Brushless Motor Electronic Speed Controller is specifically made for quadcopters and multi-rotors and provides faster and bett..
2,200.00د.ج
Ex Tax:2,200.00د.ج
Model: EVO-0080
DescriptionIf you're serious about your quadcopter's performance, look no further than the A2212. Built with high-end magnets, a high pole count and c..
2,400.00د.ج
Ex Tax:2,400.00د.ج
Model: EVO-0420
This 3D Printers Brass Nozzle 0.4mm for 3D Printers is a fully functional metal extruder. This backward compatible is basically a high-end dual ..
150.00د.ج
Ex Tax:150.00د.ج
Model: EVO-0434
This is Aluminum GT2 Timing Pulley 20 Tooth 5mm Bore For 6mm Belt. For precise motion control, GT2 belts and pulleys offer excelle..
300.00د.ج
Ex Tax:300.00د.ج
Model: EVO-0606
DescriptionThis is DC 5V, Sealed Type, 0.36W, 1 form C, PCB Type Relay.Features :1. Switching capacity available by 10A in spite of small size design ..
180.00د.ج
Ex Tax:180.00د.ج
-250x250.jpg "6X6X10MM PUSH BUTTON SWITCH 4 PIN")
Model: EVO-0910
6x6x10mm Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but ..
17.00د.ج
Ex Tax:17.00د.ج
Model: EVO-0381
40 Pin IC Socket base adaptor is an 40 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
75.00د.ج
Ex Tax:75.00د.ج
-250x250.jpg "24 PIN DIP24 INTEGRATED CIRCUIT IC SOCKETS")
Model: EVO-0376
24 Pin IC Socket base adaptor is an 24 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
30.00د.ج
Ex Tax:30.00د.ج
Model: EVO-0374
20 Pin IC Socket base adaptor is an 20 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
28.00د.ج
Ex Tax:28.00د.ج
-250x250w.jpg "18 PIN DIP18 INTEGRATED CIRCUIT IC SOCKETS")
Model: EVO-0372
18 Pin IC Socket base adaptor is an 18 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
25.00د.ج
Ex Tax:25.00د.ج
Model: EVO-0370
16 Pin IC Socket base adaptor is an 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
20.00د.ج
Ex Tax:20.00د.ج
Model: EVO-0368
14 Pin IC Socket base adaptor is an 14 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
20.00د.ج
Ex Tax:20.00د.ج
Model: EVO-0283
A photoresistor is a resistance made of a semiconductor material whose conductivity changes with the change of illuminance. This feature is used to ma..
40.00د.ج
Ex Tax:40.00د.ج
Model: EVO-0253
Description:Seven segment displays are used in many days today’s consumer devices like microwave ovens, washing machines, and air conditioners. They a..
65.00د.ج
Ex Tax:65.00د.ج
Model: EVO-0542
BATTERY 6LR61 POWER ALKALINE 9V BL1 PHILIPSThe Philips Power Alkaline 6LR61 / 9V alkaline battery is an ideal battery for devices with high power cons..
300.00د.ج
Ex Tax:300.00د.ج
Model: EVO-0995
6x6x5mm Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but c..
15.00د.ج
Ex Tax:15.00د.ج
-250x250.jpg "4MM FEMALE YELLOW BANANA PLUG CONNECTOR")
Model: EVO-0659
4mm Banana Socket Binding Post Nut Banana Plug Jack Connector is a 4mm banana plug spade connector. The connector is made of nickel-plated alumi..
50.00د.ج
Ex Tax:50.00د.ج
Model: EVO-0658
4mm Banana Socket Binding Post Nut Banana Plug Jack Connector is a 4mm banana plug spade connector. The connector is made of nickel-plated alumi..
50.00د.ج
Ex Tax:50.00د.ج
Model: EVO-0660
4mm Banana Socket Binding Post Nut Banana Plug Jack Connector is a 4mm banana plug spade connector. The connector is made of nickel-plated alumi..
50.00د.ج
Ex Tax:50.00د.ج
Model: EVO-0657
4mm Banana Socket Binding Post Nut Banana Plug Jack Connector is a 4mm banana plug spade connector. The connector is made of nickel-plated alumi..
50.00د.ج
Ex Tax:50.00د.ج
Model: EVO-0743
These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired ..
1,700.00د.ج
Ex Tax:1,700.00د.ج
Model: EVO-0340
Product description: JK42HS40-1684 stepper motor 200 steps/rev 2,8 V / 1,68 A / 0,4 NmBipolar stepper motor, four wire. It has a resolution of 200 ste..
3,250.00د.ج
Ex Tax:3,250.00د.ج
Model: EVO-0248
This Mounting Bracket from EasyMech is designed for NEMA17 Stepper Motor to mount it on the application firmly and securely. The EasyMech Bracket for ..
550.00د.ج
Ex Tax:550.00د.ج
Model: EVO-0768
SMA Female Connector Right Angled Through-Hole for PCB MountWe at robu offers, a full range of cable mount BNC/TNC and a diverse range of RF connector..
250.00د.ج
Ex Tax:250.00د.ج
-250x250.jpg "MODULE END STOP LIMIT SWITCH WITH CABLE 70CM")
On Arrival
Model: EVO-0142
Description:CNC 3D Printer Mech End-stop Switch uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it ..
350.00د.ج
Ex Tax:350.00د.ج
-250x250.jpg "MB102 830 POINTS BREADBOARD TEST PLATE")
-11 %
Model: EVO-0231
Description:An MB102 830 Points Solderless Prototype PCB Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&..
580.00د.ج 650.00د.ج
Ex Tax:580.00د.ج
-8 %
Model: EVO-0458
Highest quality precision GT2 Width 10mm Black Open ended with steel wire Timing Belt For 3D Printer. Made from NEOPRENE Synthetic Rubber reinfo..
690.00د.ج 750.00د.ج
Ex Tax:690.00د.ج
Model: EVO-0282
Description:Buzzer Rated Voltage products are very rugged in nature and provided to the consumers in fine technical configuration. These durable produ..
100.00د.ج
Ex Tax:100.00د.ج
-250x250.jpg "ALUMINUM GT2 TIMING PULLEY 20 TOOTH 5MM BORE FOR 10MM BELT")
Model: EVO-0435
This is Aluminum GT2 Timing Pulley 20 Tooth 5mm Bore For 10mm Belt. For precise motion control, GT2 belts and pulleys offer excell..
300.00د.ج
Ex Tax:300.00د.ج
Model: EVO-0985
Description:Colourful male-to-female connector jumper wire, breadboard jumper wire. male-to-female connector jumper wire cable for breadboar..
25.00د.ج
Ex Tax:25.00د.ج
Model: EVO-0983
Description:Colourful male-to-female connector jumper wire, breadboard jumper wire. male-to-female connector jumper wire cable for breadboar..
20.00د.ج
Ex Tax:20.00د.ج
Model: EVO-0484
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
4,200.00د.ج
Ex Tax:4,200.00د.ج
On Arrival
Model: EVO-0483
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
2,500.00د.ج
Ex Tax:2,500.00د.ج
Model: EVO-0010
Description:This HC-SR04-Ultrasonic Range Finder is a very popular sensor which is found in many applications where it requires measuring distance and..
600.00د.ج
Ex Tax:600.00د.ج
Model: EVO-0605
G2RL-2 Data sheet (PDF)FeaturesManufacturer: OmronProduct Category: Universal RelaysRoHS: DetailsProduct: Power RelaysType: Low-ProfileCoil volta..
450.00د.ج
Ex Tax:450.00د.ج
-8 %
Model: EVO-0035
Description:PIR Sensor Module (Passive Infra-Red ) Sensor is an electronic semiconductor-type sensor that measures infrared (IR) light radiating from ..
550.00د.ج 600.00د.ج
Ex Tax:550.00د.ج
-250x250.jpg "MB102 400 POINTS BREADBOARD TEST PLATE")
-11 %
Model: EVO-0232
Description:Solderless breadboards are commonly used for prototyping because they allow you to quickly build temporary circuits without soldering. Bre..
400.00د.ج 450.00د.ج
Ex Tax:400.00د.ج
Model: EVO-0414
Description:This flexible type motor coupling can connect your driving shaft with the driven shaft while it is very efficient in eliminating any misal..
480.00د.ج
Ex Tax:480.00د.ج
On Arrival
Model: EVO-1227
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
3,550.00د.ج
Ex Tax:3,550.00د.ج
Model: EVO-0371
16 Pin IC Socket base adaptor is an 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when require..
40.00د.ج
Ex Tax:40.00د.ج
-250x250.jpg "TB6600 STEPPER MOTOR DRIVER CONTROLLER 9~42V 4.5A")
Model: EVO-0907
Description:TB6600 stepper motor Driver Controller 4.5A 8~50V TTL 16 Micro-Step CNC Single-Axis Based on the TB6600HG chip, the new BL-TB6600-V1.2 dri..
4,300.00د.ج
Ex Tax:4,300.00د.ج
Model: EVO-0390
The PC4-01 Pneumatic Push in Bowden Extruder for 4mm J-Head fitting is a small part that connects the PTFE tubing to 1.75mm Filament extruder assembli..
170.00د.ج
Ex Tax:170.00د.ج
Model: EVO-0321
FEATURES :Reliable and removable motor to ESC connectionExcellent connectionGold plated connectorHigh amperage and low resistanceSPECIFICATIONS:Model:..
90.00د.ج
Ex Tax:90.00د.ج
Model: EVO-1196
Description:Raspberry Pi Camera Night Vision Camera Adjustable Focus Module 5MP OV5647 Webcam Video 1080p for Raspberry-pi 2 Raspberry-pi 3 Model B Mo..
6,000.00د.ج
Ex Tax:6,000.00د.ج
-250x250.jpg "NE555 1 CHANNEL 12VDC TIMER RELAY MODULE")
-8 %
Model: EVO-0719
This NE555 Delay Monostable Switch Module item is a timer switch module, based on the NE555 chip, high-performance timing CPU design. The power indica..
600.00د.ج 650.00د.ج
Ex Tax:600.00د.ج
-23 %
Model: EVO-0055
This is a development board for the ESP-WROOM-32 module from Expressif Systems. A further development from the popular ESP8266 modules, this comes wit..
2,000.00د.ج 2,600.00د.ج
Ex Tax:2,000.00د.ج
Model: EVO-0249
SK8 8MM linear bearing rail support XYZ Shaft Table CNC Router SH8A design End Support is used mainly to support Hard Chrome Plated Rods in CNC Router..
400.00د.ج
Ex Tax:400.00د.ج
-250x250.jpg "DIP ATMEGA238 COMPATIBLE ARDUINO UNO")
-11 %
Brand: ARDUINO
Model: EVO-0027
Description:The ARDUIN0 Uno R3 is an open-source microcontroller board based on the ATmega328 chip. This Board has 14 digital input/output p..
2,400.00د.ج 2,700.00د.ج
Ex Tax:2,400.00د.ج
-9 %
Model: EVO-0323
DescriptionPerhaps you've been assembling a new robot friend, adding a computer for a brain and other fun personality touches. Now the time has come t..
500.00د.ج 550.00د.ج
Ex Tax:500.00د.ج
-250x250.jpg "CNC SHIELD V3 FOR ARDUINO UNO")
-8 %
Model: EVO-0083
Description :This Expansion Board As A Driver Expansion Board Can Be Used For Engraving Machines, 3d Printers. It Has a Total Of Four Slots, Can Drive..
1,200.00د.ج 1,300.00د.ج
Ex Tax:1,200.00د.ج
-22 %
Model: EVO-0126
Description: This capacitive soil moisture sensor V2.0 measures soil moisture levels by capacitive sensing rather than resistive sensing like oth..
780.00د.ج 1,000.00د.ج
Ex Tax:780.00د.ج
Model: EVO-0410
The Blue Aluminum Alloy Coupling 5x8MM for 3D Printers and CNC Machines is lightweight coupling and exhibits more strength in class. This is made up o..
370.00د.ج
Ex Tax:370.00د.ج
-22 %
Out Of Stock
Brand: ARDUINO
Model: EVO-0049
Description:The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB ..
1,400.00د.ج 1,800.00د.ج
Ex Tax:1,400.00د.ج
Model: EVO-0255
DESCRIPTIONThe 9V Battery to DC Plug Adapter Cable provides a handy way to connect a 9V battery to a project for portable operation.PACKAGE INCLUDES:9..
100.00د.ج
Ex Tax:100.00د.ج
-250x250.jpg "65MM YELLOW WHEEL FOR TT MOTOR")
-29 %
Model: EVO-0322
Tire with sponge liner for more strengthWith upgraded tire tread for greater frictionNew design wheel for better combination with the motorDiameter: 6..
250.00د.ج 350.00د.ج
Ex Tax:250.00د.ج
Model: EVO-0488
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
2,950.00د.ج
Ex Tax:2,950.00د.ج
Model: EVO-0485
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
2,750.00د.ج
Ex Tax:2,750.00د.ج
On Arrival
Model: EVO-0486
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
3,200.00د.ج
Ex Tax:3,200.00د.ج
Brand: YAXUN
Model: EVO-0497
The Yaxun 886D 220V Soldering and Rework Station is a highly efficient tool used in electronics to solder and unsolder electronic components from prin..
10,400.00د.ج
Ex Tax:10,400.00د.ج
Model: EVO-0320
INTRODUCTIONThis is a CE-certified XT60 plug that is mini-sized .The plug features a true gold plating and a banana cross recessed design with a large..
300.00د.ج
Ex Tax:300.00د.ج
Model: EVO-0883
Description:This DC6-12V MINI Aquarium water Pump R365 is the perfect choice for any project that requires water to be moved from one place to another..
1,450.00د.ج
Ex Tax:1,450.00د.ج
-14 %
Model: EVO-0347
The Propellers 8045(8X4.5) ABS Black is the high-quality propellers specially designed for multi-copters.These Orange Propellers are light in weight a..
600.00د.ج 700.00د.ج
Ex Tax:600.00د.ج
Model: EVO-1041
Features :Resolution: 200 steps/turn (1.8°)Rated voltage: 2.8VCurrent consumption per coil: 1.68 ACoil resistance 1.65 ΩWinding inductance: 2.8 mHHold..
3,550.00د.ج
Ex Tax:3,550.00د.ج
-12 %
Model: EVO-0819
✔Magnifying glass with 10 white light LEDs and power switch.✔Adjustable auxiliary magnifying glass and 180 degree rotation.✔ It has 3 organizing drawe..
3,000.00د.ج 3,400.00د.ج
Ex Tax:3,000.00د.ج
-7 %
Model: EVO-0455
..
7,900.00د.ج 8,500.00د.ج
Ex Tax:7,900.00د.ج
-250x250.jpg "L298N MOTOR DRIVER MODULE")
Model: EVO-0677
This module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently co..
1,000.00د.ج
Ex Tax:1,000.00د.ج
-250x250.jpg "HC SR04 ULTRASONIC SENSOR MOUNT BRACKET FOR ROBOTICS KITS")
Model: EVO-0013
Description:Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Bracket you can attach the HC-SR04 mo..
250.00د.ج
Ex Tax:250.00د.ج
Model: EVO-0442
This is GT2 Aluminium Pulley (Without 20 teeth) 5mm Bore for 6mm Belt. The pulley and the timing belt combo forms an integral part of the 3-D printer...
450.00د.ج
Ex Tax:450.00د.ج
Model: EVO-0721
The ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization has a very competitive small-size camera module that can oper..
3,000.00د.ج
Ex Tax:3,000.00د.ج
-8 %
Brand: ARDUINO
Model: EVO-0030
Description:The Nano Board R3 with CH340 chip without USB Cable chipboard is based on the famous ARDUIN0 platform and does all the functions of Uno, b..
1,150.00د.ج 1,250.00د.ج
Ex Tax:1,150.00د.ج
-6 %
Model: EVO-0835
ABS Plastic Case with Logo for Raspberry Pi 4B is made of ABS. The whole close design can protect the Raspberry Pi 4b board all-round, and proof dust ..
750.00د.ج 800.00د.ج
Ex Tax:750.00د.ج
Model: EVO-0251
The 8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08 comes with top set screws which makes the inner ring of the bearing fix on the shaft...
550.00د.ج
Ex Tax:550.00د.ج
Model: EVO-0481
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
3,200.00د.ج
Ex Tax:3,200.00د.ج
Model: EVO-0955
Features:- Single-head Cartridge Heater used to the heating medium which can't work in the connection on both ends, is widely used in mould heating, h..
600.00د.ج
Ex Tax:600.00د.ج
Model: EVO-0252
The 10mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP010 comes with top set screws which makes the inner ring of the bearing fix on the shaf..
650.00د.ج
Ex Tax:650.00د.ج
Model: EVO-0632
Description:An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer..
70.00د.ج
Ex Tax:70.00د.ج
-5 %
Model: EVO-0501
CaractéristiquesPuissance48.0 WTempérature160.0 °CTension électrique230.0 VMatièresFerCARACTERISTIQUES :réglage manuel de la températureindicateur LED..
3,150.00د.ج 3,300.00د.ج
Ex Tax:3,150.00د.ج
-250x250w.jpg "YF/S401 WATER FLOW SENSOR")
Model: EVO-0009
DESCRIPTION1/8 inch YF-S401 Water Flow Sensor Flowmeter 0.3-6L/min 3.5mm 5VDC White consists of a plastic valve body, a water rotor, and a hall effect..
1,450.00د.ج
Ex Tax:1,450.00د.ج
-10 %
Brand: YAXUN
Model: EVO-0498
Brand: YAXUNReference: YX-852D+Dual displayDual on/off buttonBrushless fan and the noise is lowAutomatic cooling system increase service lifeSupply vo..
10,800.00د.ج 12,000.00د.ج
Ex Tax:10,800.00د.ج
-250x250.jpg "TRAPEZOIDAL SCREW T10X1050MM WITH BRASS NUT")
On Arrival
Model: EVO-0990
Description :The 1050mm Trapezoidal 4 Start Lead Screw 10mm Thread 10mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D pri..
5,500.00د.ج
Ex Tax:5,500.00د.ج
On Arrival
Model: EVO-0699
Description:30x30x34mm T8 Lead Screw Nut Housing Bracket For T8 Screw Brass Nut HousingSpecification:Material : Aluminum alloyScrew size: M3/M4Inner H..
1,000.00د.ج
Ex Tax:1,000.00د.ج
-11 %
Model: EVO-0234
You might be searching for a pump that operates on 12 V and gives an output of above 240L/H then this could be the best choice for your project.This U..
1,950.00د.ج 2,200.00د.ج
Ex Tax:1,950.00د.ج
-250x250.jpg "STEPPER MOTOR NEMA17 JK42HS34-1334AC 1.3A")
Model: EVO-0729
Caractéristiques:Model: JK42HS34-1334AC.Type: hybrid.Phase: 2.Pitch angle: 1.8°.Motor dimensions: 42 x 34 mm.Stem: D-shaped 21 x 5mm.Insulation resist..
3,000.00د.ج
Ex Tax:3,000.00د.ج
-5 %
Model: EVO-0537
An essential support when you take a break and to let the iron cool down after use.This compact holder also contains a metal sponge to wipe the tip of..
1,050.00د.ج 1,100.00د.ج
Ex Tax:1,050.00د.ج
Model: EVO-0062
Description:The Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servos or ESC. The Manual Mode allows ..
700.00د.ج
Ex Tax:700.00د.ج
-250x250.jpg "RELAY SCHRACK RY210012 (12V 8A 1RT)")
-21 %
Model: EVO-0597
SCHRACK RY210012 DatasheetSPECIFICATIONType of relayelectromagneticContacts configurationSPDTRated coil voltage12V DCContact current max.8AAC con..
380.00د.ج 480.00د.ج
Ex Tax:380.00د.ج
Model: EVO-1021
G2RL-14-DC24 Datasheet (PDF)FeaturesManufacturer: OmronProduct Category: Universal RelaysRoHS: DetailsProduct: Power RelaysType: Low-ProfileCoil volta..
480.00د.ج
Ex Tax:480.00د.ج
-17 %
Brand: RASPBERRY PI
Model: EVO-0791
The Raspberry Pi 4 Model B is the latest product in the Raspberry Pi computer line. It offers an unprecedented increase in processor speed, multimedia..
28,800.00د.ج 34,500.00د.ج
Ex Tax:28,800.00د.ج
Model: EVO-0163
Description : The Teflon Tubing For 3D Printers 1.75mm Filament good corrosion resistance and high insulation resistance. High or low-temperature..
450.00د.ج
Ex Tax:450.00د.ج
-15 %
Model: EVO-0338
The Orange HD Propellers 8045(8X4.5) ABS Black is the high-quality propellers specially designed for multi-copters.These Orange Propellers are light i..
550.00د.ج 650.00د.ج
Ex Tax:550.00د.ج
-250x250.jpg "MODULE INFRARED LINE TRACKING 8 CHANNEL"){kind=tracking}
-7 %
Model: EVO-0112
Description:This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pa..
1,300.00د.ج 1,400.00د.ج
Ex Tax:1,300.00د.ج
Model: EVO-0426
[Widely Compatible]Our 3D printer nozzles fit for 3D Printer such as Ender-3 series and CR-10, and compatible with all 1.75mm printing materials such ..
150.00د.ج
Ex Tax:150.00د.ج
On Arrival
Model: EVO-0851
..
4,900.00د.ج
Ex Tax:4,900.00د.ج
-8 %
Model: EVO-0884
..
1,700.00د.ج 1,850.00د.ج
Ex Tax:1,700.00د.ج
-6 %
Model: EVO-0019
DESCRIPTIONThis is a popular 16x2 LCD Display Blue LED Backlight display based on the HD 44870 display controller which makes it is easy to interface ..
750.00د.ج 800.00د.ج
Ex Tax:750.00د.ج
-250x250.jpg "INFRARED OBSTACLE AVOIDANCE IR SENSOR MODULE")
Model: EVO-0064
Description:IR Infrared Obstacle Avoidance Sensor Module has a pair of infrared transmitting and receiving tubes. When the transmitted light waves are..
400.00د.ج
Ex Tax:400.00د.ج
-11 %
Model: EVO-0034
Description:This is a I2C Serial LCD Daughter board that can be connected to a standard 16×2 or 20×4 Character Display Module that supports 4-bit..
400.00د.ج 450.00د.ج
Ex Tax:400.00د.ج
-6 %
Model: EVO-0785
7 Inches Raspberry Pi HDMI USB 1024x600 Touchscreen LCD Touch Display LED Monitor 7" 7in for RPi Desktop Computer PC 1024 x 600
Feature:
The displ..
14,950.00د.ج 15,900.00د.ج
Ex Tax:14,950.00د.ج
-22 %
Model: EVO-0074
Description:SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to ..
1,400.00د.ج 1,800.00د.ج
Ex Tax:1,400.00د.ج
Model: EVO-0737
..
750.00د.ج
Ex Tax:750.00د.ج
Model: EVO-0477
The F330 is a well thought out 330mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra ..
3,900.00د.ج
Ex Tax:3,900.00د.ج
HOT
Model: EVO-0244
..
2,700.00د.ج
Ex Tax:2,700.00د.ج
-7 %
Brand: baku
Model: EVO-1218
DETAILSThis 2 in 1 station combines soldering station and hot air station. You will be able to remove the iPod or iPad windows, the batteries from the..
9,800.00د.ج 10,500.00د.ج
Ex Tax:9,800.00د.ج
-8 %
Model: EVO-1294
AMG8833 IR 8*8 Thermal Imager Array Temperature Sensor Module is an 8×8 array of IR thermal sensors. When connected to your microcontroller (or Raspbe..
5,950.00د.ج 6,500.00د.ج
Ex Tax:5,950.00د.ج
Model: EVO-0437
This is Aluminum GT2 Timing Pulley 20 Tooth 6,35mm Bore For 10mm Belt. For precise motion control, GT2 belts and pulleys offer exc..
300.00د.ج
Ex Tax:300.00د.ج
-7 %
Model: EVO-0836
Acrylic Case for Raspberry PI 4B model with cooling fan slot is a newly designed Transparent case for Raspberry pi 4. It is unassembled 6-piece transp..
650.00د.ج 700.00د.ج
Ex Tax:650.00د.ج
-250x250.jpg "6X6X12MM PUSH BUTTON SWITCH 4 PIN")
Model: EVO-0911
6x6x12mm Tactile Push Button Switch is widely used as a standard input “buttons” on electronic projects. These work best when you mount it on PCB but ..
20.00د.ج
Ex Tax:20.00د.ج
-250x250.jpg "530PCS COLORED HEAT SHRINK SHEATH")
-6 %
Model: EVO-0530
Description:Eco-friendly heat shrink tubing does not produce toxic and harmful substances. It is widely used in wire connection and has many advantage..
1,500.00د.ج 1,600.00د.ج
Ex Tax:1,500.00د.ج
HOT
--20 %
Model: EVO-0346
..
600.00د.ج 500.00د.ج
Ex Tax:600.00د.ج
-5 %
Model: EVO-1044
DESCRIPTIONLonger version of 4WD Wheel Double Layer Smart Car Robot Chassis Kit with Speed Encoder is an ideal electronic toy for both kids and adults..
4,350.00د.ج 4,600.00د.ج
Ex Tax:4,350.00د.ج
-250x250.jpg "4MM BLACK BANANA PLUG CONNECTOR")
Model: EVO-0655
DESCRIPTIONThese budget friendly inexpensive Banana Plug connectors come in both red and black for making jumper and test cables.KEY FEATURES OF BANAN..
25.00د.ج
Ex Tax:25.00د.ج
-250x250.jpg "40X80 V-SLOT® C-BEAM ALUMINUM LINEAR GUIDE RAIL 1M")
Model: EVO-0493
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
4,900.00د.ج
Ex Tax:4,900.00د.ج
On Arrival
Model: EVO-0491
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
4,150.00د.ج
Ex Tax:4,150.00د.ج
Model: EVO-0226
This is Black Plastic Storage Box Case Holder For Battery 4 x 18650 Cell Box, without cover can hold 4 pieces of 18650 batteries. The case box can kee..
400.00د.ج
Ex Tax:400.00د.ج
-7 %
Model: EVO-0060
The description:Universal Heated Bed Power Expansion Module High Power Module for 3D PrintersEffectively solve the problem that the power of the therm..
1,400.00د.ج 1,500.00د.ج
Ex Tax:1,400.00د.ج
-250x250.jpg "3D PRINTER CONTROLLER BOARD RAMPS 1.4 ARDUINO MEGA SHIELD")
Model: EVO-0094
Description:This RAMPS stands for Rep Rap Arduino-compatible MEGA Pololu Shield. It is built for combining all electronic components needed for your R..
1,800.00د.ج
Ex Tax:1,800.00د.ج
Model: EVO-0356
It is a 2.54mm 1×40 Pin male Single Row Through-hole Header Strip. It has a single row of 40 pins. Ideal for through-hole mounting...
75.00د.ج
Ex Tax:75.00د.ج
Model: EVO-0224
The 3.7V 4.2V 2 x 18650 plastic battery holder for lithium batteries case can use 2 x 18650 batteries to supply any power system using 3.7V.and 4.2V t..
250.00د.ج
Ex Tax:250.00د.ج
-12 %
Brand: YAXUN
Model: EVO-0725
Specifications:Voltage: 110V/240VRated Output Power: 350WAir Type: Air pumpAir Flow: 150ml/min (max)Soldering (Temperature Range): 200˚C~480˚CHot Air ..
19,800.00د.ج 22,500.00د.ج
Ex Tax:19,800.00د.ج
Model: EVO-0061
Description:This is XH-W1209 12V Digital Temperature Controller Module W/ Display and NTC Waterproof Temperature Sensor. W1209 Mini thermostat Te..
1,100.00د.ج
Ex Tax:1,100.00د.ج
-9 %
Model: EVO-1279
ntroductionVoice recognition is something that knows exactly what you were saying. It differs from Sound Control, which means controlling the light on..
6,800.00د.ج 7,500.00د.ج
Ex Tax:6,800.00د.ج
-250x250.jpg "USB HOST SHIELD ARDUINO")
Model: EVO-0071
Description:The Arduino Compatible USB Host Shield is based on the MAX3421E, which is a USB peripheral/host controller containing the digital logic an..
2,500.00د.ج
Ex Tax:2,500.00د.ج
New
HOT
Model: EVO-0503
Description :The 400mm Trapezoidal 4 Start Lead Screw 8mm Thread 8mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printi..
2,100.00د.ج
Ex Tax:2,100.00د.ج
Model: EVO-0502
Description :The 300mm Trapezoidal 4 Start Lead Screw 8mm Thread 8mm Pitch Lead Screw with Copper Nut used for general machine tools such as 3D printi..
1,800.00د.ج
Ex Tax:1,800.00د.ج
-5 %
Model: EVO-0822
Magnifier-Third Hand MG16129-AThe holder is mainly used in electronic soldering, jewelry, assembly and repair to clamp small parts in any desired posi..
1,950.00د.ج 2,050.00د.ج
Ex Tax:1,950.00د.ج
-20 %
Model: EVO-0097
DESCRIPTIONST-Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full ra..
1,200.00د.ج 1,500.00د.ج
Ex Tax:1,200.00د.ج
-9 %
Model: EVO-0536
..
3,900.00د.ج 4,300.00د.ج
Ex Tax:3,900.00د.ج
-7 %
Model: EVO-1168
..
3,900.00د.ج 4,200.00د.ج
Ex Tax:3,900.00د.ج
-7 %
Model: EVO-1217
..
3,900.00د.ج 4,200.00د.ج
Ex Tax:3,900.00د.ج
-5 %
Model: EVO-1104
..
1,850.00د.ج 1,950.00د.ج
Ex Tax:1,850.00د.ج
-5 %
Model: EVO-0954
..
950.00د.ج 1,000.00د.ج
Ex Tax:950.00د.ج
HOT
Model: EVO-1321
..
650.00د.ج
Ex Tax:650.00د.ج
-250x250.jpg "SKYRC BRUSHLESS MOTOR X2208 MOTOR 4PCS 2000KV")
-5 %
Brand: sky rc
Model: EVO-0987
Product DescriptionCNC Machined T6 Billet Aluminum Heatsink Can for Impressive and Durable AppearanceHigh Quality Bearings for Less ResistanceHigh Pur..
8,500.00د.ج 8,950.00د.ج
Ex Tax:8,500.00د.ج
-250x250.jpg "SINGLE SIDED EPOXY PERFORATED PLATE 10X22CM")
Model: EVO-0859
Description:This is 10 X 22 CM Universal PCB Prototype Board single-sided High-quality universal prototyping board with standard 0.1″ spacing through ..
680.00د.ج
Ex Tax:680.00د.ج
-250x250.jpg "RTC CLOCK MODULE DS1307")
Model: EVO-0022
With compact design, the board can integrate the real-time clock module DS1307, EEPROM memory AT24C32 and digital temperature sensor DS18B20 (not supp..
400.00د.ج
Ex Tax:400.00د.ج
Model: EVO-1424
..
49,000.00د.ج
Ex Tax:49,000.00د.ج
Model: EVO-1423
..
52,000.00د.ج
Ex Tax:52,000.00د.ج
Model: EVO
RF4 RF6555-PRO Max 6.5X-55X Trinocular Full HD Stereo Microscope With Zooming 0.48X CTV Camera Lens & LED Adjustable Light..
85,000.00د.ج
Ex Tax:85,000.00د.ج
.jpg-250x250.jpg "RF4 RF-6565PRO 6.5-65X TRINOCULAR SYNCHRONOUS MICROSCOPE WITH LED LIGHTS")
Model: EVO-1428
..
79,900.00د.ج
Ex Tax:79,900.00د.ج
-15 %
Model: EVO-0040
Description:This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as l..
850.00د.ج 1,000.00د.ج
Ex Tax:850.00د.ج
-250x250.jpg "OV7670 640×480 VGA MODULE CAMERA FOR ARDUINO")
Model: EVO-0802
Description:OV7670 640X480 VGA CMOS Module is a low-cost image sensor module, DSP that can operate at a maximum of 30 fps and 640 x 480 (“VGA”) resolu..
1,900.00د.ج
Ex Tax:1,900.00د.ج
Model: EVO-0566
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 320 degrees, can effectively replace..
380.00د.ج
Ex Tax:380.00د.ج
HOT
Model: EVO-0139
Description:The sound sensor module provides an easy way to detect sound and is generally used for detecting sound intensity. This module can be used ..
450.00د.ج
Ex Tax:450.00د.ج
Model: EVO-0057
Description :This Tower Pro MG996R Digital Metal Gear High Torque Servo Motor (270 Degree Rotation)features metal gearing resulting in extra high 10kg..
1,700.00د.ج
Ex Tax:1,700.00د.ج
Model: EVO-0466
Product description2.5X 7.5X 10X LED Light Magnifier Helping Hand Auxiliary Clamp Alligator Clip Stand Features: Useful auxiliary tool in soldering an..
2,300.00د.ج
Ex Tax:2,300.00د.ج
Model: EVO-0179
DESCRIPTIONThis is MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino with this module, you will find easy to control any ..
1,000.00د.ج
Ex Tax:1,000.00د.ج
-17 %
Model: EVO-0862
Features3 Refined AxisThree axes allow forflat engraving with an effective area of 300(X)X 200 (Y)X 40 (Z)mm(11.8″X 7.8″X 1.6″),which can accommodate ..
48,000.00د.ج 58,000.00د.ج
Ex Tax:48,000.00د.ج
Model: EVO-0427
[Widely Compatible]Our 3D printer nozzles fit for 3D Printer such as Ender-3 series and CR-10, and compatible with all 1.75mm printing materials such ..
150.00د.ج
Ex Tax:150.00د.ج
Model: EVO-0425
[Widely Compatible]Our 3D printer nozzles fit for 3D Printer such as Ender-3 series and CR-10, and compatible with all 1.75mm printing materials such ..
150.00د.ج
Ex Tax:150.00د.ج
Model: EVO-0087
DESCRIPTIONLM2596 DC-DC Buck Converter Adjustable Step Down Power Supply Module is an buck converter step-down power module with high-precision potent..
550.00د.ج
Ex Tax:550.00د.ج
-4 %
Model: EVO-0929
..
10,900.00د.ج 11,300.00د.ج
Ex Tax:10,900.00د.ج
Model: EVO-1082
Description :Seven segment displays are used in today’s consumer devices like microwave ovens, washing machines, and air conditioners. They are a simp..
250.00د.ج
Ex Tax:250.00د.ج
-13 %
Model: EVO-0902
Description :This Laser Non-modulator Tub Sensor Receiving Module Laser output High Level is a sensor for Raspberry Pi and Arduino to receive the lase..
350.00د.ج 400.00د.ج
Ex Tax:350.00د.ج
-250x250.jpg "L-SHAPED SERVOMOTOR BRACKET")
Model: EVO-1192
Description:This 'L' shaped brackets is designed to fit most standard sized servos. This bracket is both lightweight and strong. Various holes are loc..
350.00د.ج
Ex Tax:350.00د.ج
Model: EVO-0218
Description:This is a great combo for you arduino base projects. This combo contains Laser Sensor Module 6mm 5V And Male To Female Jumper Wires. This ..
350.00د.ج
Ex Tax:350.00د.ج
-11 %
Model: EVO-0714
DETAILSPowertech offers you KADA 852AD+ HOT AIR STATION Multi-functional Environmental Protection Combination Maintain System Large Heat Capacity Rewo..
9,300.00د.ج 10,500.00د.ج
Ex Tax:9,300.00د.ج
-13 %
Model: EVO-0464
Description :A new design of easy compact balance charger for 2 and 3 cells LiPo battery fast charging with wide AC input.An internal 100-240V AC swit..
2,100.00د.ج 2,400.00د.ج
Ex Tax:2,100.00د.ج
Model: EVO-0156
DESCRIPTIONThis is a HC-06 Bluetooth Transceiver HC06 with TTL Output for Arduino for use with any microcontroller. It uses the UART protocol to make ..
1,100.00د.ج
Ex Tax:1,100.00د.ج
-8 %
Model: EVO-0155
DESCRIPTIONHC-05 Bluetooth Module HC05 with TTL Output is a Bluetooth module for use with any microcontroller. It uses the UART protocol to make..
1,200.00د.ج 1,300.00د.ج
Ex Tax:1,200.00د.ج
-250x250.jpg "FT232RL FTDI USB TTL SERIAL MODULE ADAPTER")
Model: EVO-1252
Description:The main chip for the FT232, generates a virtual serial port after installing the driver 2, USB to take power, leads to the interface incl..
800.00د.ج
Ex Tax:800.00د.ج
-250x250.jpg "FS1000A 433MHZ TX & RX RF RADIO MODULE")
Model: EVO-0161
Description:Remote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors..
400.00د.ج
Ex Tax:400.00د.ج
-250x250w.png "FLYSKY FS-I6X 2.4GHZ AFHDS 2A WITH FS-A8S")
New
HOT
Model: EVO-0350
..
17,900.00د.ج
Ex Tax:17,900.00د.ج
-250x250.jpg "FLOW METER SENSOR YF/S201 / 1 A 30 L/MIN 2.0MPA")
-14 %
Model: EVO-0008
Description:This is YF-S201 Water Flow meter Measurement Sensor with 1-30Leter/min Flow Rate in black color. This sensor sits in line with your water ..
1,250.00د.ج 1,450.00د.ج
Ex Tax:1,250.00د.ج
Model: EVO-0708
Description :The module(ESP-01) can work with AT comma when used with Arduino, USB to TTL adaptor (FTDI USB module is recommended). The additional pow..
800.00د.ج
Ex Tax:800.00د.ج
Model: EVO-1113
Features:High-speed, low-resistance PWM.Low twist start, soft start acceleration.Automatic throttle range adjustment.Automatic engine shutdown with re..
2,600.00د.ج
Ex Tax:2,600.00د.ج
Model: EVO-1246
Specification:Type ER11Material 40CRColor silver, blackLength 45mmInner diameter 5mmFeatures:-ER straight rod type collet extension handle, the handle..
2,400.00د.ج
Ex Tax:2,400.00د.ج
Model: EVO-0847
Specification:Type ER11Material 40CRColor silver, blackLength 45mmInner diameter 5mmFeatures:-ER straight rod type collet extension handle, the handle..
2,400.00د.ج
Ex Tax:2,400.00د.ج
-250x250.jpg "E18-D80NK MINI ADJUSTABLE INFRARED SENSOR SWITCH 3-80CM")
-11 %
Model: EVO-0970
The E18-D80NK Mini Adjustable Infrared Sensor Switch 3-80cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The detect..
1,250.00د.ج 1,400.00د.ج
Ex Tax:1,250.00د.ج
-250x250.jpg "DS3231 RTC CLOCK MODULE WITHOUT BATTERY")
-10 %
Model: EVO-0023
DS3231 RTC High Precision Real-Time Clock Module with AT24C32 EEPROMThe DS3231 RTC High Precision Real-Time Clock Module is a low-cost, extr..
900.00د.ج 1,000.00د.ج
Ex Tax:900.00د.ج
-6 %
Model: EVO-0328
Description:The DJI NAZA-M Lite V1.1 with GPS Kit is a simplified version, inheriting the high reliability and stability of the Naza M flight controll..
31,500.00د.ج 33,500.00د.ج
Ex Tax:31,500.00د.ج
Model: EVO-1089
This screen is made up of many thin copper wires and is used to remove excess tin from the soldering point or during soldering. When heated with the b..
400.00د.ج
Ex Tax:400.00د.ج
-13 %
Model: EVO-0831
ZD-205 Desoldering pumpIt is formed by a strong spring inside the body, a button to be used to compress this spring, another little button in the midd..
700.00د.ج 800.00د.ج
Ex Tax:700.00د.ج
-15 %
Model: EVO-0828
It is formed by a strong spring inside the body, a button to be used to compress this spring, another little button in the middle to release the sprin..
550.00د.ج 650.00د.ج
Ex Tax:550.00د.ج
-250x250.jpg "CREALITY PRINTER 3D HOTEND")
-250x250.jpg "CREALITY PRINTER 3D HOTEND")
On Arrival
Model: EVO-0964
DescriptionThe CR10 Hotend kit is a set of spare parts valid for Creality 3D printers: Ender-3, Ender-3 S, Ender-3 Pro, CR-10, CR-10S and to use 1.75m..
2,500.00د.ج
Ex Tax:2,500.00د.ج
Model: EVO-1129
Product Description Control software GRBL controlConstruction Aluminum + BAKELITEWorking area 300*180*40mmFrame size 400*330*240mmSpindle 775 spi..
42,000.00د.ج
Ex Tax:42,000.00د.ج
Model: EVO-0412
The Blue Aluminum Alloy Coupling 6x8MM for 3D Printers and CNC Machines is lightweight coupling and exhibits more strength in class. This is made up o..
370.00د.ج
Ex Tax:370.00د.ج
Out Of Stock
Model: EVO-0411
..
370.00د.ج
Ex Tax:370.00د.ج
-250x250.jpeg "AT9S+R9DS 10CH RADIOLINK AT9S PRO")
New
HOT
Model: EVO-0749
..
36,500.00د.ج
Ex Tax:36,500.00د.ج
-250x250.jpg "ARDUINO PRO MICRO ATMEGA32U4 5V 16MHZ")
On Arrival
Brand: ARDUINO
Model: EVO-0120
Description:The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB conn..
1,350.00د.ج
Ex Tax:1,350.00د.ج
-12 %
Model: EVO-0119
Description:Creative products, BLE-Nano-Board: Upgraded nano board for Arduino, The main chip is ATMEGA328P-MU QFN32, the latest bootloader (Arduino I..
2,200.00د.ج 2,500.00د.ج
Ex Tax:2,200.00د.ج
-250x250w.jpg "ARDUINO LEONARDO R3 BOARD MICRO-USB")
Model: EVO-0140
DESCRIPTIONArduino Leonardo R3 Board Micro-USBs is Leonardo Board, Arduino's first development board to use one microcontroller with built-in USB. Usi..
2,500.00د.ج
Ex Tax:2,500.00د.ج
Model: EVO-1063
Characteristic:Made of solid, durable aluminum.These heater blocks are CNC machined, with high precision and quality, and stable performance.Aluminum ..
750.00د.ج
Ex Tax:750.00د.ج
-13 %
Model: EVO-0331
..
350.00د.ج 400.00د.ج
Ex Tax:350.00د.ج
-9 %
Model: EVO-0529
..
1,450.00د.ج 1,600.00د.ج
Ex Tax:1,450.00د.ج
HOT
Model: EVO-1444
..
4,800.00د.ج
Ex Tax:4,800.00د.ج
Model: EVO-0082
DescriptionIf you're serious about your quadcopter's performance, look no further than the A2212. Built with high-end magnets, a high pole count and c..
2,400.00د.ج
Ex Tax:2,400.00د.ج
Model: EVO-0772
Specification Connector Type: 9V Battery snap connectorLeads are polarity color coded (Red and black)with Plastic HeadColor: BlueMaterial: Soft l..
65.00د.ج
Ex Tax:65.00د.ج
Model: EVO-1159
This 7pcs 5.05mm Mini Drill Chucks For Rotary Power Tools Dia 0.5mm/1.0mm/1.5mm/2.5mm/3.0mm set is made of copper with excellent workmanship. It is su..
650.00د.ج
Ex Tax:650.00د.ج
Model: EVO-0654
DESCRIPTIONThese budget friendly inexpensive Banana Plug connectors come in both red and black for making jumper and test cables.KEY FEATURES OF BANAN..
30.00د.ج
Ex Tax:30.00د.ج
-18 %
Model: EVO-0193
Description:This is a Micro AC 220V 4000W Voltage Regulator SCR 220VAC Voltage Regulator Dimmer Electric Motor Speed Controller. This product uses the..
1,800.00د.ج 2,200.00د.ج
Ex Tax:1,800.00د.ج
-250x250.jpg "3D PRINTER CONTROLLER BOARD RAMPS 1.5 ARDUINO MEGA SHIELD")
On Arrival
Model: EVO-0095
OVERVIEWThe RAMPS 1.5 is a variation of the popular RAMPS boards that, like all other RAMPS boards, is plugged into an Arduino Mega for operation. The..
1,900.00د.ج
Ex Tax:1,900.00د.ج
On Arrival
Model: EVO-1148
V-Slot Linear Rail aluminum extrusion profile is the ultimate solution combining both linear motion and a modular, structural framing system. It's lig..
2,450.00د.ج
Ex Tax:2,450.00د.ج
-250x250.jpg "2-CHANNEL RELAY MODULE 5V – 10A OPTOCOUPLER")
Model: EVO-0044
DESCRIPTIONThis 12V Dual Channel Relay Module meets the safety standard as control areas and load area have the isolation groove. Optical coupling iso..
650.00د.ج
Ex Tax:650.00د.ج
-15 %
Model: EVO-0875
Description Display Voltage and current simultaneously in different colors, red for Voltage, Blue for current (the current is Measured in the neg..
2,100.00د.ج
Ex Tax:2,100.00د.ج
Model: EVO-0742
These are the smooth rods used for 3D printer kits. They’re made of chrome-plated high-carbon steel and provide smooth, consistent motion when paired ..
1,400.00د.ج
Ex Tax:1,400.00د.ج
Model: EVO-0823
Third hand JM506 ZD-10G (MG16130) with magnifier and soldering iron standThird hand ZD-10G (MG16130) - a holder for fixing small parts in various posi..
1,250.00د.ج
Ex Tax:1,250.00د.ج
-5 %
Model: EVO-0822
Magnifier-Third Hand MG16129-AThe holder is mainly used in electronic soldering, jewelry, assembly and repair to clamp small parts in any desired posi..
1,950.00د.ج 2,050.00د.ج
Ex Tax:1,950.00د.ج
-250x250.jpg "SMART CONTROLLER FOR 3D PRINTER RAMPS 1.4 LCD GRAPHIC 12864 128X64")
Model: EVO-0085
Description:The 3D printer 128×64 Smart LCD controller for ramps 1.4 contains an SD-Card reader, a rotary encoder and a 128×64 LCD display. ..
3,560.00د.ج
Ex Tax:3,560.00د.ج
Model: EVO-0089
DESCRIPTIONThis XL6009 DC-DC Adjustable 5-35V Step-Up Boost Power Converter Module is a non-isolated step-up (boost) voltage converter featuring adjus..
650.00د.ج
Ex Tax:650.00د.ج
-3 %
Model: EVO-0820
iMac Optical MG16129-DC - a "third hand" magnifying glass with two "crocodile" clips, a holder for a soldering iron.Lenses can be combined to achieve ..
3,400.00د.ج 3,500.00د.ج
Ex Tax:3,400.00د.ج
-250x250.jpg "ULN2003 STEPPER MOTOR DRIVER MODULE")
-250x250.jpg "LIPO BATTERY 350MAH 702030")
