Menu
Your Cart
FREE FAST SHIPPING ON ORDERS ABOVE 30000.00DA

SW-1801P VIBRATION SENSOR MODULE

SW-1801P VIBRATION SENSOR MODULE
SW-1801P VIBRATION SENSOR MODULE
SW-1801P VIBRATION SENSOR MODULE
SW-1801P VIBRATION SENSOR MODULE
SW-1801P VIBRATION SENSOR MODULE
  • Stock: In Stock
  • Model: EVO-0199
  • Weight: 5.00g
  • Dimensions: 32.00mm x 14.00mm x 0.00mm
190 samples sold
Product Views: 1478
350.00د.ج
Ex Tax: 350.00د.ج

Description:

The Tilt Sensor Vibration Alarm Vibration Switch Module for Arduino come with the basic components for operation. Supplying power and it is good to be used. Attach it to object and it will detect whether the object is tilt. Simple usage as it is the digital output, so you will know the object is tilt or not by reading the output. It uses SW-460D or SW-520D tilt sensor. The Tilt Sensor is the ball rolling type, NOT Mercury type. Comes with an M3 mounting hole for ease of attaching it to an object. On board, it provides a tilt switch, high sensitivity and commonly being used for tilt detection. The module comes with power LED and status LED for the visual indicator. The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted over the threshold angle. We have tested, the tilt angle is quite big, from 45 degrees to 130 degrees. However, it depends on the angular velocity too. It can be used as a vibration sensor too.

Specification:

Operating voltage: 3.3 to 5VDC

Comparator: LM393

Features:

Ball Rolling type of tilt sensor

This small module is easy to use

A fixed bolt hole for easy installation

Wide voltage LM393 comparator

Pin Description:

VCC: Connect the power supply positive

GND: Connect the power supply negative

DO: Digital signal output

AO: Use this vibration sensor to disable this function

Instructions:

The product does not shake, the vibration switch was disconnected, the output high, Greenlight does not light

The product vibration, the vibration switch instantaneous conduction, the output low, green light

The output can be directly connected with the microcontroller, through the microcontroller to detect high and low levels, which to detect whether the environment vibration, play a warning role

Use:

For a variety of vibration trigger, reported Pao alarm, intelligent car, electronic building blocks and so on.

Please note that this module in the induction of a small shock when the trigger time will be very short, not enough to drive the relay, some people can directly connect with the relay module data, the actual use of poor results.

Write a review

Note: HTML is not translated!
Bad Good

Unlimited Blocks, Tabs or Accordions with any HTML content can be assigned to any individual product or to certain groups of products, like entire categories, brands, products with specific options, attributes, price range, etc. You can indicate any criteria via the advanced product assignment mechanism and only those products matching your criteria will display the modules.

Also, any module can be selectively activated per device (desktop/tablet/phone), customer login status and other criteria. Imagine the possibilities.