-500x137.png "evolutronics")
Search Criteria
Products meeting the search criteria
-250x250.jpg "A4988 STEPPER MOTOR DRIVER")
-9 %
Model: EVO-0032
Description:The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with a built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A ..
500.00د.ج 550.00د.ج
Ex Tax:500.00د.ج
-9 %
Model: EVO-0033
Description:The DRV8825 Stepper Motor Driver Module is an excellent motor driver solution for printers, scanners, and automated equipment applications, and is often used by our customers for the 3D Printers we sell. The driver block consists of N-channel power MOSFETs set to full H-bridge ..
680.00د.ج 750.00د.ج
Ex Tax:680.00د.ج
Model: EVO-1278
MX1508 Dual H Bridge DC PWM Stepper Motor Driver module is ideal for use in battery-powered smart cars, toy cars, robots. Supply voltage 2V ~ 10V can drive two DC motors or 4-wire 2-phase stepper motors, can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed. E..
450.00د.ج
Ex Tax:450.00د.ج
Model: EVO-0340
Product description: JK42HS40-1684 stepper motor 200 steps/rev 2,8 V / 1,68 A / 0,4 NmBipolar stepper motor, four wire. It has a resolution of 200 steps per revolution (1.8 degrees). It is powered by 2.8 V and draws 1650 mA per coil. The torque is 4.0 kg*cm (0.4 Nm). Dimensions are 42 x 42 x 40 mm (..
3,250.00د.ج
Ex Tax:3,250.00د.ج
Model: EVO-1041
Features :Resolution: 200 steps/turn (1.8°)Rated voltage: 2.8VCurrent consumption per coil: 1.68 ACoil resistance 1.65 ΩWinding inductance: 2.8 mHHolding torque 4.4 kg*cm (0.43 Nm)Outputs: bipolar (four wires)Shank diameter: 5mmWeight: 350 gramsStandard: NEMA 17Dimensions: 42 x 42 x 48 mm (without s..
3,550.00د.ج
Ex Tax:3,550.00د.ج
-5 %
Model: EVO-1273
..
7,600.00د.ج 8,000.00د.ج
Ex Tax:7,600.00د.ج
Model: EVO-0248
This Mounting Bracket from EasyMech is designed for NEMA17 Stepper Motor to mount it on the application firmly and securely. The EasyMech Bracket for NEMA 17 Stepper Motor is made from high-quality Hardened Mild Steel.The Mounting Bracket is designed by EasyMech with one thing in mind, boosting the ..
550.00د.ج
Ex Tax:550.00د.ج
Model: EVO-0247
This Mounting Bracket from EasyMech is designed for NEMA23 Stepper Motor to mount it on the application firmly and securely. The EasyMech Bracket for NEMA 23 Stepper Motor is made from high-quality Hardened Mild Steel.The Mounting Bracket is designed by EasyMech with one thing in mind, boosting the ..
650.00د.ج
Ex Tax:650.00د.ج
-250x250.jpg "STEPPER MOTOR NEMA17 JK42HS34-1334AC 1.3A")
Model: EVO-0729
Caractéristiques:Model: JK42HS34-1334AC.Type: hybrid.Phase: 2.Pitch angle: 1.8°.Motor dimensions: 42 x 34 mm.Stem: D-shaped 21 x 5mm.Insulation resistance: 100 MΩ min, 500 VDC.Insulation resistance: 500 VAC for one minute.Working current: 1.3A.Pitch angle accuracy: + – 5% (full pitch, no load).Resis..
3,000.00د.ج
Ex Tax:3,000.00د.ج
Model: EVO-0903
DESCRIPTIONTB6600 Stepper Motor Driver Controller 4A is easy-to-use professional arduino stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal.TB6600 Arduino stepper motor driver has a ..
4,100.00د.ج
Ex Tax:4,100.00د.ج
-250x250.jpg "ULN2003 STEPPER MOTOR DRIVER MODULE")
Model: EVO-0137
Description:This is a ULN2003 Stepper Motor Driver Board, small size and easy to use. It uses the ULN2003 driver chip to amplify the control signal from the Arduino. This Ultra Lightweight and cheap option is commonly used to run and control the small applications of stepper motors. It uses the ULN2..
350.00د.ج
Ex Tax:350.00د.ج
Showing 1 to 11 of 11 (1 Pages)