Menu
Your Cart
FREE FAST SHIPPING ON ORDERS ABOVE 30000.00DA

All Products

12V 2A ADAPTER
-15 %
Model: EVO-1226
..
470.00د.ج 550.00د.ج
Ex Tax:470.00د.ج
12V 2A SWITCHING POWER SUPPLY
-38 %
Model: EVO-1059
..
750.00د.ج 1,200.00د.ج
Ex Tax:750.00د.ج
12V 30A SWITCHING POWER SUPPLY
-14 %
Model: EVO-0521
..
3,200.00د.ج 3,700.00د.ج
Ex Tax:3,200.00د.ج
Model: EVO-0522
..
4,900.00د.ج 5,400.00د.ج
Ex Tax:4,900.00د.ج
12V 5A SWITCHING POWER SUPPLY
-22 %
Model: EVO-0517
..
1,250.00د.ج 1,600.00د.ج
Ex Tax:1,250.00د.ج
12V-40V10A DC MOTOR PWM SPEED CONTROL 12V-40V10A DC MOTOR PWM SPEED CONTROL
-17 % On Arrival
Model: EVO-0191
Description:The DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. The circuit also ..
1,450.00د.ج 1,750.00د.ج
Ex Tax:1,450.00د.ج
Model: EVO-0575
Description : 12x12x7.3mm Tactile 4 Pin Push Button Switch is fully compatible to B3F-4055 Switch. It has 4 pins, 2 pins of each side are connected to each other. So, pressing the switch, connects all 4 pins. It has current capacity of 100 mA. The top of the switch is such that, cap can be easi..
45.00د.ج
Ex Tax:45.00د.ج
Model: EVO-0368
14 Pin IC Socket base adaptor is an 14 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.The socket is used when the IC is temperature sensitive ..
20.00د.ج
Ex Tax:20.00د.ج
Model: EVO-0369
14 Pin IC Socket base adaptor is an 14 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.The socket is used when the IC is temperature sensitive ..
40.00د.ج
Ex Tax:40.00د.ج
Model: EVO-0571
Description:The 4 Series 14.8V 18650 Lithium Battery Equalization Board is suitable for the lithium battery pack with no equalization charge and the charging balance is balanced Make each battery in the battery pack full of electricity at the same time. This new 4 string lithium battery protection b..
750.00د.ج 800.00د.ج
Ex Tax:750.00د.ج
Model: EVO-0183
Description: The Sharp GP2Y0A02YK0F IR Range Sensor - 20 cm to 150 cm takes a continuous distance reading and reports the distance as an analog voltage with a distance range of 20cm (~8") to 150cm (~60"). The interface is 3-wire with power, ground and the output voltage and requires a SIRC-01 S..
2,100.00د.ج
Ex Tax:2,100.00د.ج
Model: EVO-0370
16 Pin IC Socket base adaptor is an 16 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.The socket is used when the IC is temperature sensitive ..
20.00د.ج
Ex Tax:20.00د.ج
Showing 25 to 36 of 894 (75 Pages)